Just foam in tones and hightlights
Nice 'n Easy Color Blend Foam makes coloring your hair easy & delightful.

This Kit Contains:

• Formula
• Activator
• Foamer cap
• ColorSeal™ Conditioning Gloss
• Gloves

Our Color Blend formula begins as a liquid then applies as a foam giving you beautiful tones and highlights for up to 8 weeks. It's drip-free, easy to apply, and puts dimensional hair color at your fingertips.

Just 3 shakes.
Mix with 3 easy shakes. Let settle.

Foam it.
Squeeze foam to fill half your palm.

Love it.
Apply directly with your fingertips! (Do not re-shake.)

Hear it from an expert: Marie Robinson
Clairol Colorist Named the "Best haircolor stylist" by Instyle magazine.

"Foam is next generation of at home hair color.
Nice 'n Easy color blend give you multi-dimensional
color with natural-looking tones and highlights."

Will foam hair color give me the same coverage as my regular formula?
Absolutely! Color Blend Foam is designed to cover and color completely, front to back and root to tip. Simply distribute the foam evenly throughout your hair and follow the time indicated in your strand test. Watch our How-to video for more tips.

How is foam's coverage better than liquid or cr�me coverage?
Color Blend Foam gives you more product volume as it foams up offering effortless, complete coverage. With Color Blend Foam, it's easy to cover every strand over your entire head.

Does foam spread as easily as liquid or stay in place as well as cream?
Whereas a liquid spreads more easily than a cream, a cream stays in place better. Nice `n Easy Color Blend Foam combines the best of both worlds. It behaves like a solid when resting, eliminating the drip-factor, but acts as a liquid when moving, making it easier to spread.

How does foam actually color my hair?
Once it is applied to your hair, your hair's natural oils collapse the foam. The resulting liquid is drawn through the hairs, allowing the color to penetrate hair quickly and evenly from root to tip. Color Blend Foam will not begin to collapse until it's applied to your hair.

Product Ingredients:

Shade 6
Nice n Easy Colorblend Foam:  Water, Ethoxydiglycol, Propylene Glycol, Isopropyl Alcohol, Ammonium Hydroxide, Toluene-2,5-Diamine Sulfate, Trisodium Ethylenediamine Disuccinate, Sodium Chloride, Fragrance, Resorcinol, Erythorbic Acid, Citric Acid, Sodium Sulfite, Phenyl Methyl Pyrazolone, EDTA, m-Aminophenol, 2-Methylresorcinol, 4-Amino-2-Hydroxytoluene, 2-Amino-4-Hydroxyethylaminoanisole Sulfate.

Nice n Easy Colorblend Activator:  Water, Hydrogen Peroxide, Acrylates/Steareth-20 Methacrylate Copolymer, Acrylates Copolymer, Etidronic Acid, Disodium EDTA.

Nice n Easy ColorSeal Conditioning Gloss: included with Shades 2, 4, 4RB, 5, 5A, 5G, 5RB, 6, 6A, 6G, 6R, 6.5G:  Water, Bis-Hydroxy/Methoxy Amodimethicone, Stearyl Alcohol, Cetyl Alcohol, Stearamidopropyl Dimethylamine, Glutamic Acid, Benzyl Alcohol, Fragrance, Panthenyl Ethyl Ether, EDTA, Carthamus Tinctorius (Safflower) Seed Oil, Cocos Nucifera (Coconut) Oil, Panthenol, Hydrolyzed Sweet Almond Protein, Trimethylsiloxysilicate, Aloe Barbadensis Leaf Juice, Methylchloroisothiazolinone, Methylisothiazolinone.

Important Safety Instructions
Hair color products may cause allergic reactions, which in rare cases can be severe. Tattoos may increase the risk of allergy to this product.

To reduce your risk, follow these instructions:

• Do not use this product if you have experienced any reaction to hair color products or have sensitive, irritated or damaged scalp. In these cases, do not conduct the skin allergy test and consult a doctor before using any hair color product.
• Conduct a skin allergy test 48 hours prior to each application, even if you have already used coloring products before.

What to do if you have a reaction during or within the next 48 hours of coloring your hair:

If during coloring you experience:

• Any stinging, burning or rash, rinse immediately and discontinue use as this may be an indication of a more serious reaction. Do not color your hair again before consulting a doctor or seeking medical advice.
• Any rapidly spreading skin rash, dizziness or faintness, shortness of breath or swelling to eyes/face, rinse immediately and seek immediate medical attention.

If after coloring or on the following days you experience:

• Problems such as itching, rash, swelling to eyes/face, blistering or skin/scalp weeping, seek immediate medical attention.

Retain the product for identification and call 1-800-CLAIROL.  Our Expert Color Consultants will advise you what to do next and reimburse your purchase of this product if necessary.

Special Cautions

• This product contains ingredients, including hydrogen peroxide, which may cause severe eye irritation and possible permanent eye injury. If any product gets into your eye, flush immediately with a large amount of lukewarm water and seek medical advice. 
• We recommend removing contact lenses before applying hair color. If you must wear contact lenses during application, and if any product gets into your eye, remove the lens first, then flush immediately with a large amount of lukewarm water and seek medical advice. 
• Never use hair color on eyebrows or eyelashes or if your scalp is irritated or injured. 
• Do not inhale or ingest product. 
• Do not use if your hair has been colored with henna or metal dyes. 
• Prepare and use the product in a well-ventilated area. If you experience inhalation difficulties, move to fresh air. 
• Remove all metal objects from hair before and during coloring. 
• Wear gloves and rinse hair well after application. 
• Keep product in a cool place away from heat and light. 
• Do not mix this colorant with any other product. 
• Do not keep any unused mixed product. Do not leave the mixture in a closed bottle (bottle may expand or burst).

Product not intended to be used on children. Keep all hair coloring products out of reach of children.

How To Use

Do the skin allergy test 48 hours before each application, even if you have already used coloring products.

Before Starting:

• Use a smock or an old towel to protect your clothing
• Have a clock handy for timing 
• Apply color to dry hair

Get Ready to Color:

1 Mix

• Put on the gloves. 
• Add bottle (1) to bottle (2). Replace the white cap. 
• Give the bottle 3 simple shakes, formula mixes easily.
• Let bottle settle for 30 seconds before squeezing. 
• No need to re-shake during use. 
• Replace the cap with the foamer top. 
• Foamer cap is not a pump.

Once mixed, never reseal or store the color in a closed container as it could burst.

2 Squeeze & Dispense

• Keep the bottle upright. Firmly squeeze center of the bottle. Do not hold horizontally while squeezing. 
• Squeeze foam to fill half the palm of your gloved hand. 
• If initial foam is runny, do not apply. Squeeze lightly 2-3 times until high quality foam is dispensed. 
• Distribute foam to both hands and apply to hair.

If foam or color get on your skin or household surface, wipe it off immediately with a damp towel.

3 Apply

• For all-over application, work the product into dry hair from root to tip using a shampoo-like motion. Keep applying
    until hair is completely wet. 
• For root-targeted application, apply to roots and grays first, then to the rest of your hair 
• Carefully re-touch your hairline and temples again for complete coverage. Wait 25 minutes.
  For resistant grays, leave on an additional 10 minutes. 
• Rinse until water runs clear. 
• Apply the conditioner.  Leave on for 2 minutes. Rinse out completely. Save second packet. Use 1 week later.

For best results use at least 75% of foam in bottle for short hair for long hair use entire bottle.

Frequently Asked Questions: About Clairol Products

How do I mix it?
For best results, less is more. Here are some tips: Once you pour the colorant, which is bottle 1, into the foamer bottle (bottle 2), put the cap on and give it 3 simple shakes to mix the contents. The formula mixes easily. No more shaking is necessary. The mixed formula remains a liquid in the bottle; the foam forms when you squeeze it into your hand.

If you over-shake or continue to shake during the application process, the bottle may fill with foam and cause the foam to be runny. If this happens, do not apply yet. See number 3 below.

How do I apply it?
After 3 simple shakes, allow the mixture to settle for 30 seconds. Then, squeeze the center of the bottle to start the foaming action. The mixed formula remains a liquid in the bottle; the foam forms when you squeeze it into your hands. Apply the foam to your head with your hands. Continue applying until your hair is completely wet.

If the foam is runny, do not apply; discard on a paper towel or tissue. You may have over-shaken the product. Allow the mixture to settle for 30 seconds, then squeeze the foamer bottle lightly 2-3 times until high-quality foam is dispensed. Keep the bottle upright while squeezing for the best quality foam and to prevent runniness.

It didn't foam up; it was a runny foam. What's wrong?
You may have over-shaken it. You only need 3 simple shakes to mix the product. This technology works with the unique foamer cap to transform the liquid in the bottle and create a drip-free foam in your hand when the bottle is squeezed. If the foam is runny, do not apply�discard on a paper towel or tissue. Allow the mixture to settle for 30 seconds, then squeeze the foamer bottle 2-3 times until high quality foam is dispensed. Do not re-shake during use.

Holding the bottle horizontally while squeezing can also cause runny foam to be dispensed. Be sure to keep the bottle upright while using.

For future use, please remember:

• You only need 3 simple shakes to mix the product, using a gentle shake. You don't want a lot of foam to be created inside the bottle.
• The product should remain liquid in the bottle and you must squeeze the bottle to create foam in your hand.
• Always let the product settle for 30 seconds after mixing to ensure the foam in the correct consistency.

Do not re-shake during use.

Additional Instructions

Before you color - 48 Hours in Advance

• Take the Allergy Test.
• Do the Strand Test to determine your optimal coloring time. 
• Read the entire instructions before you begin.

Skin Allergy Test Instructions
Must be performed 48 hours before you color your hair

You will need a cotton ball or swab, a plastic bowl and a plastic spoon.

To open, unscrew the entire Color Blend Foam Activator developer bottle cap (#2). Then unscrew the Color Blend Foam Formula cap (#1).

Mix small equal parts of the Color Blend Foam Formula and Color Blend Foam Activator in a plastic bowl.

Tightly recap both bottles.

Apply mixture to a test area the size of a quarter in the bend of your elbow.  Allow to dry.  Use remaining mixture for the Strand Test.  Do not wash this area for 48 hours.  During washing, protect with an adhesive bandage and remove it immediately after washing.

Examine the test area during the next 48 hours. If no reaction occurs, you are ready to color.

The absence of a reaction to this test is no guarantee that an allergic reaction may not occur as a result of a future hair coloring process.  However, this test represents an important precaution.   Please consult a doctor if you have any doubts.

Note: if a rash, redness, burning or itching occurs, you may be allergic. Stop. You must not use this product.

Strand Test:

Do the Strand Test each time you color to determine optimal timing and color results. Perms, relaxers, previous color, and the sun can affect your results and timing. You will need: scissors, tape and a clock.

Cut a � inch wide strand from the darkest or grayest part of your dry hair close to the scalp and tape at the cut end.

Completely cover the hair strand with the mixture remaining from the allergy test. Start timing.
After 15 minutes, check the strand. If the strand is not the color you want, return it to the mixture and check the color every few minutes for up to 25 minutes. For extra light blonding, more intense color results, or to cover resistant grays, it may be necessary to leave the hair color on for up to 45 minutes.
Fill in your personal color time below:
My timing for desired color: _______ minutes.

Color Hints & Tips:

• Do not apply to wet hair. Apply color to dry hair that is free of styling product build-up. If hair has build-up, shampoo one day prior to coloring.
• Do not shampoo immediately before coloring. Your scalp has natural oils that help to protect it during the coloring process.
• If any color gets on your skin or household surface, wipe it off immediately with a damp towel. 
• Use the additional ColorSeal™ Conditioning Gloss 1 week after coloring. 
• Call the Expert Color Consultants at 1-800-CLAIROL if you are going more than two shades lighter or darker than your current color, going dramatically red or if you have bleached, double processed or highlighted hair. 
• Wait at least 1 week after perming or relaxing before coloring.