Make sure the shaver is turned off. Removing foil carriers or cutters when shaver is running can result in injury. To replace new cutters and foils: Remove foil carriers by pushing both release buttons on side and lifting the foil carriers off the shaver. The cutters are now exposed. Remove the cutters by grasping the flat ends of the cutters between thumb and forefinger, then pull the cutter straight up and off the oscillator. Caution: under the cutter is a small spring- do not lose this or your shaver will not work. Attach new cutters by pushing the cutters onto the plastic oscillator until you hear a click. Make sure the spring is in place. The cutters are now on correctly. To replace your new foil carriers: Take the foil carriers off. Insert new foil carriers until both sides snap into place. Be careful not to damage the foils. Caution: do not push against the foil itself since it can be easily damaged.
100% Performance1 Foil & CutterFits Series 1 shaver models.Blades should
be replaced every eighteen months.For optimum performance, clean regularly.11B Series 1Within 18 months on average, a Braun shaver will cut ...