This product sprays out as a liquid, seeps into cracks and holes and dries to a watertight, flexible coating that is virtually invisible. It seals out water, air and moisture and helps prevent rust and corrosion. Once dry, it can be painted over. This product is the easy way to coat, seal, protect and stop leaks fast.
Excellent for: Skylights, gutters, downspouts, flashings, windowsills, PVC pipes, roof leaks, hoses, chimneys, duct work, foundations, awnings, vent pipes, A/C drip pans, RVs and campers, trailers and so much more. No CFCs.
Made in Canada
DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. VAPOR HARMFUL. MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION. CONTENTS UNDER PRESSURE.KEEP OUT OF THE REACH OF CHILDREN.DANGER: Contains (CAS No): Toluene (108-88-3), Acetone (67-64-1), Parachlorobenzotrifluoride (98-56-6), Heptane (142-82-5) and Liquefied Petroleum Gas (68476-86-8). Use only in a well-ventilated area. When using inside, prevent vapor buildup by opening doors and windows. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights or other sources of ignition. When covering large areas indoors eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances. Intentional misuse by concentrating and inhaling the product can be harmful or fatal. Avoid contact with eyes or prolonged contact with skin. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120°F. This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
FIRST AID: IF EYE CONTACT: Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. Remove contact lenses, if present and easy to do. If irritation persists, get medical attention immediately. IF SKIN CONTACT: Wash with soap and water. If irritation persists, seek medical attention. EXCESSIVE INHALATION: Remove to fresh air. Seek medical attention immediately. If breathing stops, give artificial respiration. IF INGESTED: Do not induce vomiting. Seek medical attention immediately.
WARNING: This product contains a chemical known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/.
Use only in a well ventilated area. When using inside, prevent vapor buildup by opening doors and windows. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights or other sources of ignition. When covering large areas indoors, eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances
When applying to large areas indoors, do not exceed use of 1/2 of a can before allowing one hour for the coating to dry and vapors to dissipate before using again
Shake well and spray using an even sweeping motion
Apply several even coats until all cracks and holes have been filled
Allow to dry completely before applying the next coat. Fully cures in 24 hours
Spray a larger area than where the leak occurred and feather edges
Works best at can temperatures above 60°F
Occasionally shake can throughout application
Note: After each use, invert can and apply a short burst to clear nozzle.
Not intended for use by professional roofers.
This product has not been tested for use in potable water systems.