Directions for properly replacing dry salt inhaler cartridge:
Remove Clear cap covering from the colored Nasal/Bronchial Applicator.
Hold Nasal/Bronchial Applicator between your index finger and thumb at the center circle of the inhaler.
Gently pull the Nasal/Bronchial Applicator away from Clear Lower Cap thus exposing the white salt cartridge
While hilding the Nasal/Bronchial Applicator between your thumb and index finger grasp the White Salt Cartridge and gently pull to separate it from the Nasal Bronchial Applicator
Broncial Inhaler: Place the new Replacement Salt Cartridge with valve into the Clear Lower Cap and discard old Salt Cartridge.
Nasal Inhaler Without Vapor Strip: Remove the clear valve from the top of the Replacement Salt Cartridge and discard. Place the new Replacement Salt Cartridge into the Clear Lvoer Cap and discard old Salt Cartridge To Use with Vapor Strip: Remove the clear valve from the top of the Replacement Salt Cartridge and discard. Place the vapor strip into the strip holder and snap the holder into the bottom of the Salt Cargridge. Place the new Replacement Salt Cartridge into the Clear Lower Cap and discard old Salt Cartridge.
Replace colored Nasal/Bronchial Applicator on the top of the new White Replacement Cartridge
Replace Clear Top cap over colored Nasal/Bronchial applicator.
Other Important Information
After first use, replace salt cartridge and/or vapor strip every 90 days for optimal therapy
Keep inhaler in cool, dry place
See cartridge package for lot number
Maintenance: Periodically check for visible obstructions in the air holes located at the bottom of the device. To remove obstructions, you may have to dislodge clogged particles with a fine needle or pin to allow air to pass through the opening. The exterior of the device may be cleaned with a damp clean soft cloth.