Kanto AVS2 2-Component Shelf System 1 ea
We're sorry but this item is temporarily out of stock.
Caution (Wood stud wall): The layer of wall material (i.e. drywall) may not exceed 5/8 inch in thickness. Do not over tighten screws. Tighten screws until the wall plate, in Step 1, is flat against the wall. Each screw must be located in the center of a wood stud. Use a stud finder or nail for locating the stud edges to determine the center. Caution (Concrete wall): Make sure the brick is at least 3" thick. Do not drill into motor joints. Tighten screws until wall plate, in Step 1, is a flat against the wall. Do not over tighten screws. Make sure the anchor is seated completely flush with the concrete surface even if there is another layer of material, such as drywall. If drywall is over 5/8" thick custom screws must be used. Concrete must be a minimum of 2000psi in density.