Comments about NeilMed Sinus Rinse Dry Dock Stand, 1 Each:
This is a better option over the storage stand for the bottles (since the storage stand you can not use to drain your bottle, since water collects in the storage portion).
The issues with this design.. suction cups do not like to stick. Design leans, so the straw part of the bottle top will touch the glass/surface the holder is attached to.
The solution I found to help the suction stick, and the holder not to lean..w as to us something at the bottom of the holder, between the holder & the surface it is attached to-- an electric prong cover worked well.. but a small piece of plastic or bottle cap might work.
Not a lot of options to drain/store the bottles.. so this will "do".
Bottom Line Yes, I would recommend this to a friend
For Screw Mounting Method: Use the printed template on the side of the box to mark location of holes for the mounting screws. You may use tip of the screws to mark your points. For dry wall mounting, drill a pilot hole in each of the marked positions using the appropriate size drill bit. Now tap in the anchor until approximately 2/16 in. is still protruding out of the wall. You may mount the provided screws directly in to the wooden stud at each location and in this case do not use the anchors. Now affix the unit to the wall using the two keyholes at the back of the unit. Double-Sided Tape Mounting: Using the provided double-sided tape, peel the protective layer off one side of the tape and adhere it to the back of the unit. Clean and dry the area where the holder is going to be mounted. Make sure the surface is both flat and smooth. Mark the position with a pencil. Remove the other protective layer from the exposed side of the tape and adhere the unit to the desired position on the wall by pressing firmly on the wall. For the best adhesion, do not use it for a day. Suction Cup Mounting: Using the provided suction cups, affix the mushroom head of the suction cups to the keyhole at the back of the unit. Clean and dry the area where the holder is going to be mounted. Make sure the surface is a non-porous flat surface. Moisten the suction cups and firmly affix the unit to the desired position on the wall.
Moisturizing relief for dry sinus passages. Helps relieve dry nasal
passages due to: Cold, allergies sinusitis Air pollution, smoke, low humidity Overuse of decongestant sprays Ayr...helps you breathe better.
Helps Alleviate: Nasal Allergies, Dryness, Post Nasal Drip, Congestion &
Stuffiness from Common Cold & Flu Specially Designed Nozzle Delivers the Finest and most Gentle Mist for Adults, Children & Infants ...
Pediatric Starter Kit Help Your Child Breathe Easier Day or
Night Soothing, no burning or stinging large volume & low pressure™ system for saline nasal irrigation, moisturization & daily nasal ...