3 Blade Cutting System for Fast, Smooth & Close Shave Automatic Cleaning and Charging System Included
Flexible Pivoting Head Conforms to neck and jaw area for an effortless shave.
Nanotech™ Blades Nano polished 30° angle blades are 56% sharper*1 for a closer shave.
Multi-Fit Arc Blades Follows the contours of your face for efficient coverage and maximum comfort.
Fast, Linear Motor Drive 13,000 cycles per minute linear motor drive delivers a smoother, cleaner shave.
Wet/Dry Shaving Enjoy the convenience of dry operation or use with foam or gel for a pampering silky-smooth shave.
Washable Rinses clean under running water.
Sonic Vibration Cleaning Mode While rinsing the shaver under running water, sonic vibrations help remove any clinging hair debris, leaving the blades fresh and renewed.
Illuminated LCD LCD battery status and charge indicator plus cleaning reminder to keep your blades fresh.
Pop-Up Trimmer For moustache and sideburns.
Battery Fully Recharges in 1 Hour
Up to 45 Minutes (Approx. 2 Weeks) of Cordless Shaving
5-Minute Quick Charge = 1 Shave
100 • 240V Automatic Universal Voltage
Travel Lock Switch
*1 Compared to Panasonic Shaver ES4026NC.
*2 Compared to Panasonic Shaver ES-RT51-S.
Made in China
Please Note: This item has been built to U.S. electronics specifications and may need additional modifications or converters to be used in countries other than the U.S. and Canada.
When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. Save these instructions. Danger: To reduce the risk of electric shock: 1. Do not reach for the appliance if it has fallen into water. Unplug immediately. 2. Do not place or store the charging stand where it can fall into a tub or sink. Do not place or drop it into water or other liquid. 3. Except when charging, always unplug the charging stand from the electrical outlet. 4. Unplug this appliance before cleaning. 5. Changer unit is not for immersion or for use in shower. 6. Do not use an extension cord with this appliance. Warning: To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Do not use this shaver with damaged shaving blades and/or foil. 2. Close supervision is necessary when this shaver is used by, on, or near children or invalids. 3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 4. Never operate the charging stand if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged or dropped into water. Return the appliance to a service center for examination and repair. 5. Never drop or insert any object into any opening. 6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 7. Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to "off" then remove plug from outlet. 8. Keep the cord away from heated surfaces. Important: This shaver has a built-in rechargeable battery. Do not throw into fire, apply heat, or charge, use, or leave in a high temperature environment. Warning: Disconnect the power cord from the shaver before cleaning it in water to prevent electric shock. Terminate the usage when there is abnormality or failure. Plug in the adaptor into a household outlet where there is no moisture and handle it with dry hands. Never use the adaptor in the bathroom or shower room. Do not dismantle or replace the battery so that you can use the shaver again. This could cause fire or an electric shock. Have it replaced at an authorized service center. Disconnect the power cord when storing the shaver. Do not bend the power cord or wrap it around the shaver. The supply cord cannot be replaced. If the cord is damaged, the adaptor should be scrapped. Caution: The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil is damaged as you will cut your skin. Keep both the inner blades inserted. If only one of the inner blades is inserted, the shaver may be damaged. If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Clean the housing only with a soft cloth slightly dampened with tap water or soapy tap water. Do not use thinner, benzine, alcohol or other chemicals. Store the shaver in a place with low humidity after use. Do not store the shaver where it will be exposed to direct sunlight or other heat sources. Hold the adaptor when disconnecting it from the household outlet. If you tug on the power cord, you may damage it. Do not share your shaver with other people. Doing so may result in infection or inflammation.
Before operating this product, please read the enclosed operating instructions completely. Intended use: This wet/dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water. Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic wet/dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method. This shaver body has a waterproof performance that is compliant to the "IPX7", and the adapter has a waterproof performance that is compliant to the "IPX4". Notes: This product is intended for household use only. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Using the lock ring: Use the lock ring to lock or unlock the power switch. 1. Rotate the lock ring until it clicks. Unlock the power switch: When shaving, washing the shaver, lubricating the shaver. Lock the power switch: When carrying the shaver. Charging the shaver: 1 Insert the appliance plug into the shaver. 2 Plug in the adaptor into a household outlet. Turn the shaver off before attaching. Charging is completed after approx. 1 hour. You cannot operate the shaver while charging. After charging is completed, turning the power switch ON with the shaver plugged in will cause all the battery capacity lamps to light up and then turn off after 5 seconds. This shows that the shaver is fully charged. Recommended ambient temperature for charging is 15-35 °C. The battery may not charge or the performance may degrade when charging in extreme low or high temperatures. The charge status lamp will blink when there is a problem with charging. When charging the shaver for the first time or when it has not been in use for more than 6 months, the charge status lamp may not glow. It will eventually glow if kept connected. Using the shaver: 1 Rotate the lock ring and press the power switch. 2 Hold the shaver as illustrated above and shave. Tips for best shaving results: Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave. Using the trimmer: Press the trimmer lock button and slide the trimmer handle up. Place at a right angle to your skin and move downwards to trim your sideburns. Cleaning the shaver: 1. Disconnect the power cord from the shaver. 2. Apply some hand soap and some water to the outer foil. 3. Rotate the lock ring to unlock the power switch. 4. Turn the shaver on. 5. Turn the shaver off after 10-20 seconds. 6. Remove the outer foil section and turn the shaver on. 7. Clean the shaver and the outer foil section with running water. 8. Wipe off any drops of water with a dry cloth. 9. Dry the outer foil section and the shaver completely. 10. Attach the outer foil section to the shaver. Cleaning with the brush: Clean the inner blades using the short brush by moving it in direction. Clean the system outer foil, the shaver body and the trimmer using the long brush. Do not move the short brush in direction as it will damage the inner blades and affect their sharpness. Do not use the short brush to clean the outer foils. Replacing the system outer foil: 1. Press the foil frame release buttons and lift the outer foil section upwards. 2. Press the system outer foil release buttons and pull down the system outer foil. 3. Insert the system outer foil until it clicks as illustrated. Always attach the system outer foil in proper direction. Always insert the system outer foil to the foil frame when attaching to the shaver. Replacing the inner blades: 1. Press the foil frame release buttons and lift the outer foil section upwards. 2. Remove the inner blades one at a time. Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand. 3. Insert the inner blades one at a time until they click.
Ultimate Shaving Experience W ith GyroFlex 3D & Ultratrack System
Jet Clean+ Chromed Numeric Display Our most advanced shave yet, the SensoTouch 3D shaver gives you the ultimate shaving experience. ...
New World's 1st Shaver with Active Cooling Technology Calms Skin,
Minimizes Shaving Irritation LED display for battery status, cleaning indication + travel lock indicator Waterproof up to 5m for full ...