As we age, our skin care regimen and the Facial Ionic Steamer can help.
More youthful-looking skin can be yours in just a few weeks.
How it works: The Facial Ionic Steamer emits nano-sized particle ionic steam, which is 4,000 times finer than ordinary particles, easing skin absorption. The result is renewed, reawakened, velvety appearing skin.
Benefits of facial ionic steam therapy: Maintaining sufficient skin moisturization is an effective methods of combating the signs of aging. Daily use of the Panasonic Facial Ionic Steamer as part of your daily routine can help.
Clinically shown to:
Deliver noticeable results in 4 weeks.
Reduce the appearance of fine lines after daily use in just 14 days.
Study participants observed improvement at 14 and/or 28 days of use:
This product is:
Why Panasonic? Panasonic has been a premier manufacturer of quality beauty products since 1937 and introduced our first facial steamer in 1980.
As we age, our skin begins to lose elasticity and the ability to retain ,oisture which leads to lines and wrinkles. Steam therapy as part of your skin care regimen can help nurture your skin.
The Facial Ionic Steamer produces nano-sized particles which are 4,000 times smaller than regular steam particles to help you nourish your skin.
To ensure proper operation of this appliance, please read carefully all the safety precautions before use. The safety precautions are provided to instruct you how to correctly and safely operate this appliance so that you may avoid injuries to yourself and others as well as damage to property, The safety precautions are defined as follows. Always follow these important safety precautions. This message indicates potentially hazardous actions and situations, which, if not avoided, could result in personal injury or property damage. The following persons should consult a physician before use: Persons with acute illnesses or malignant tumors, persons who are pregnant. Persons who have allergies and sensitive skin. Persons with skin problems, such as dermatitis, severe sunburns, etc. Persons with skin injuries, eczema, swelling, etc. Failure to do so may result in skin problems. Immediately stop using if pain of discomfort is experienced. Continued using may result in skin or health problems. When disposing of the water after use, hold appliance so that you hands are not exposed to the hot water. Failure to do so may result in burns. Always ensure the appliance is operated on an electric power source matched to its rated voltage. Failure to do so may result in fire, electric shock, burns, or scalding. Do not tilt, shake, or carry the appliance during use or within 10 minutes after use. (Doing so may cause a large amount of steam to discharge or hot water to spill from the outlet.) Do not touch or look into steam outlet during use. (Since steam is still released [for about 60 seconds] after turning off the power, do not approach the steam outlet.) Do not allow your face of hands to come in direct contact with the steam or within 20 cm (8") from the edge of the nozzle. When filling the appliance with water, be careful not to let water come in contact with the nozzle, cosmetic ring, main panel, or switch. Do not use the appliance under the following conditions: When the cord or plug is damaged or becomes hot. When the plug is loose in the power outlet. Doing so may result in fire, electric shock, short circuit, burns, or scalding. Do not cut, damage, modify, unreasonably bend, pull, or twist the cord. Also do not place heavy objects on the cord or squeeze the cord. Doing so may result in fire, electric shock, burns, or scalding.
Preparation: Place the appliance on a flat level surface, such as on a desk, which would not cause a problem if covered with water droplets. Check that the drain cup is installed in the appliance. Press the water supply cover release button to lift up the water supply cover. Use the water supply cup to fill the appliance with water. Do not fill directly from a water faucet. Use distilled water or water has been softened by a water softener. Otherwise, it causes calcium carbonate and mold inside of the appliance, that might shorten the service life of the appliance. If hard water is used, the mineral content of the water will form deposits on the inside of the boiler of the appliance and may obstruct the flow of steam. When water is filled to the "full" mark, the application can be used for approximately 12 minutes. Water collects in the drain cup if too much water is added. Dispose any leftover water in the water supply cup. (If the water supply cup is placed on a table or other surface, it may tilt causing the water inside to spill out.) Do not fill with water above the "full" mark. Close the water supply cover. Firmly close until a click is heard. How to use the ion steamer: Insert the plug into a power outlet and press to power switch until a click is heard. When the ion lamp turns on, ionized steam is released after about 30 seconds. It is normal for hot water droplets to be discharged at the beginning of the steam flow. A whizzing may be heard. This is the sound of electric discharge which is normal. Do not operate the appliance with the water supply cup placed in the nozzle. Adjust the angle (up/down) of the nozzle. Adjust the nozzle while taking care not to directly touch the steam. How to use the hot steam (platinum steam): Move your face slightly to the left and right so that the steam spreads evenly. Using the steam on your nose is effective on the T-zone. Keep your face at least 20 cm (8") away from the edge of the nozzle. When using the appliance for the first time or it is difficult to find the appropriate distance, use the attached leaflet to confirm the distance between the area you want to expose to the steam and the nozzle edge. Position the steam outlet towards your face slightly above your chin. After use, wipe off the water (such as with a tissue), then apply a lotion to further moisturize your face and apply an emulsion to supplement skin oil. Other ways to use the Ionic Facial Steamer: In addition to using the appliance on bare skin, it can also be used in combination with facial treatments. Before cleansing: Use the appliance for about 3 minutes. (This lifts dirt from your skin.) Perform cleansing. Apply massaging cream and use the steam while massaging your skin. Use the appliance after lotions and face creams. After use: Be sure to discard the water in the tank every time after use. Press the power switch until a click is heard to turn off the power and then remove the plug from the power outlet. The lamp turns off. Be careful not to touch the steam when pressing the switch. Failure to do so may result in burns or scalding. Do not operate the appliance if it contains no water. Doing so will quicken the accumulation of water scale, which may result in poor steam discharge. Leave the appliance alone to cool for at least 10 minutes. Discard the water in the drain cup. Pour out the water from the appliance in the direction of the arrow as shown. Emptying the water in a direction other than that indicated by the arrow may get the switch wet, which may cause a malfunction. To prevent rick of burns or scalding when discarding the water, hold the bottom of the appliance. Repeat the above steps 2-3 times for effective cleaning. Wipe off any water from the appliance. Even if there are water scale deposits near the water inlet or water level, the discharged steam is not affected.
With Clear Complexion Technology Ultra Soft Bristles Non Irritating Small
facial brush is made of very soft bristles, specially designed for sensitive skin. The same high quality brush that was ...
Measurable Difference® Facial Nano Steamer rechargeable with USB cord included
Helps transform dull, dry skin into refreshed, healthy looking skin Instantly moisturizes, with no wet, sticky feeling Temporarily soothes and ...