Bona Hardwood Floor Polish, High Gloss 36 fl oz (1.06 L)

High Gloss

Adds a Protective New Layer & Fills in Microscratches

• Brings a Durable Shine to Your Floor
• Non-Toxic, Quick & Easy
• Durable Urethane Shine
• Specially Designed for Wood Floors

Since 1919, Bona has made the finest wood floor finishes available worldwide.  Bona's unique Swedish finish technology has now been applied to this specially formulated waterborne urethane polish.

Bona® floor cleaners have passed the more stringent GREENGUARD Children & School's program for indoor air quality criteria & are non-toxic to ensure you have the best for your floors, your family & the environment.

Used by professionals since 1919. 

877-289-2662

Bona Hardwood Floor Polish cannot be coated with polyurethane or Bona Hardwood Floor Refinisher.  Bona Hardwood Floor Polish is not a cleaner.  Make sure the floor is completely clean & dry before applying this product.  Do not use over any floor that has been oiled or waxed.  Wax, oil or other contaminants may prevent this product form adhering.  Always use a clean applicator.  Use of contaminated applicator may cause a hazy or streaky appearance.  Never use string mops, cotton mops or sponge mops to apply this product.  Avoid replacement of furniture & floor mats for at least 24 hours.  Not for use on unfinished wood or unsealed floors.  Keep from freezing.  Keep out of reach of children.  May cause stomach irritation.  If swallowed, drink 1 or 2 glasses of water to dilute.  In case of eye contact, flush with water.  Buyer assumes all responsibility for proper use in accordance with label instructions.  Results may vary according to the individual application techniques & prior condition of floor.

Perform a test on small inconspicuous area that is representative of your whole floor to determine compatibility & to ensure you like the newly polished look.  Remove furniture, rugs, etc.  Vacuum, sweep or dust mop, then thoroughly clean with Bona Hardwood Floor Cleaner & the Microfiber Cleaning Pad on your Bona Mop.  Allow the floor to dry.  Gently rock polish bottle back & forth to mix for 30 seconds.  Attach the Microfiber Applicator Pad to the mop.  Squirt onto the floor & spread.  Work in sections small enough to keep the Applicator Pad wet,  Smooth with the grain. Continue working in sections until the entire floor is finished.  When finished, rinse Applicator Pad with water.  Allow the floor to dry at least 1 hour before walking.  This bottle covers 550 square feet.  Coat the entire floor to ensure an even appearance.  Allow for 24 hours before heavy traffic or additional coats.