Attenuation Data Tested according to ANSI S.3.19-1974
Frequency Hz
125
250
500
1000
2000
3150
4000
6300
8000
Mean Attenuation, dB
36.8
38.0
40.4
41.1
40.1
44.4
48.5
46.4
45.8
Standard Deviation, dB
4.0
4.5
5.5
4.0
2.7
4.5
4.1
5.4
5.2
NRR: 32 dB
The level of noise entering a person's ear, when hearing protector is worn as directed, is closely approximated by the difference between the A-weighted environmental noise level and the NRR.
Example: 1. The environmental noise level as measured at the ear is 92 dBA. 2. The NRR is 32 decibels (dB). 3. The level of noise entering the ear is approximately equal to 60 dBA.
The range of noise reduction ratings for existing hearing protectors is approximately 0 to 30 (higher numbers denote greater effectiveness).
1-866-786-2353
100% Satisfaction guaranteed with all Walgreens products or your money back.
Warnings
If the recommended fitting instructions are not adhered to, the protection afforded by the earplugs will be severely impaired. Consult the enclosed instruction insert for proper fit. Remove earplug slowly with twisting motion to gradually break the seal. Rapid removal may damage eardrum. For noisy environments dominated by frequencies below 500 Hz, the C-weighted environmental noise level should be used. Improper fit of this device will reduce its effectiveness in attenuating noise. Consult the enclosed instructions for proper fit. Although hearing protectors can be recommended for protection against the harmful effects of impulsive noise, the Noise Reduction Rating (NRR) is based on the accurate indicator of the protection attainable against impulsive noise, such as gunfire. Constant or repetitive exposure to impulsive noise may lead to serious injury, including temporary or permanent deafness. The Noise Reduction Rating (NRR) calculated from the attenuation data is 32 dB. Earplugs must be properly fitted to attenuate noise effectively. Refer to instructions.
� 2015 Walgreen Co.
Fitting:
With clean hands, roll entire earplug into narrowest possible crease-free cylinder
Reach over head with free hand, pull ear up and out, and insert earplug well inside ear canal
Hold for 40 seconds, until earplug fully expands in ear canal
In a noisy environment with earplugs inserted, cup hands over ears and release. Earplugs should be blocking enough noise so that covering them with hands does not result in a significant difference. If proper fit is not obtained, move to a quiet location and repeat fitting instructions
Description:
Make Your Own Quiet Time! Excellent for: Sleeping, studying, travel,
blow drying, lawn mowing, power tools, concerts or sports events Smooth, tapered design Soft comfortable fit Original formula Noise reduction ...
Description:
New & Improved Highest NRR 33 Mega Value EZ Grip™
Design Noise Reduction Rating 33 Decibels (when used as directed). The range of noise reduction ratings for existing hearing protectors ...
Description:
New & Improved NRR 30 EZ Grip Design PVC Free
Noise Reduction Rating 30 Decibels (when used as directed). The range of noise reduction ratings for existing hearing protectors is ...