Duracell myGrid removes the daily hassle of charging your mobile devices.  No more finding the right cord.  No more clutter of multiple cords .  It's Charging Made Simple.

• Works with Blackberry®, Motorola®, and Nokia®
• Everything you need to get started.
• Contains 1 Duracell myGrid charge pad and 1 Duracell Power Clip with compatible tips for miniUSB powered phones and Nokia phones.
• Charge up to 4 devices on one pad.

Charging Made Simple™

• Easy to use - just set & go
• Safe to the touch
• As fast as standard chargers*

Charge up to four devices at once 
You can charge up to four myGrid-enabled devices (BlackBerry's, Motorola Phones, Apple iPhone, etc.) on the myGrid charging pad at once. Make sure that the devices are sitting flat, facing up, and making firm contact with the charging pad.

Eliminate the mess of multiple cords 
Instead of using multiple cords and outlets to charge your devices, the myGrid can charge up to four devices using a single cord and outlet - eliminating the mess of multiple cords. Also, the myGrid is as fast as standard chargers*, so using less cords is the most efficient way to charge multiple devices.
*Based on USB 2.0

Ultra-slim profile 
The myGrid doesn't take up a lot of space, making it ideal for counter tops, nightstands or just about any flat surface near an electrical outlet. The pad measures 6.75" x 8.5", enough room for up to four devices, and the actual charging surface is less than 1/8" thick.

Blackberry

• Pearl 8100 Series
• Curve 8300 Series
• 8800
• Bold Series

Motorola

• RAZR Series
• RAZR V3 Series
• MOTOQ Series
• W385
• W370

Nokia

• E71 Series
• 2610
• 6085
• 6555
• 6061

Questions? 1-800-551-2355

Made in China

Installing and using the Power Clip™ 

myGrid is easy to use:

• Step 1. Insert the proper tip into the device?s charging port. Press the tip into the charging port and ensure a proper fit.
• Step 2. Place the Power Clip on the tip and make sure the two are seated together properly, then swivel the Power Clip over the center of the phone and press firmly into place (the adhesive backing on the Power Clip should be removed prior to installation).
• Step 3. Ready to charge, place the device on to the myGrid charging pad making sure that it rests fully on the pad. The blue indicator light will appear on the myGrid charging pad when the device is being charged properly. 

Installing and using a Power Sleeve™ 

myGrid is easy to use:

• Step 1. Carefully insert your device into the Power Sleeve.
• Step 2. Use your fingers to stretch the Power Sleeve over the top of the device.
• Step 3. Ready to charge, place the device on to the myGrid charging pad making sure that it rests fully on the pad. The blue indicator light will appear on the myGrid charging pad when the device is being charged properly. 

Safe to touch 

If the system is functioning properly and there is no fault detected (i.e. keys, metal object or a hand placed on the charging pad) then the indicator light will turn off in 3-5 seconds. You are now ready to charge your myGrid-enabled devices. Simply place them on the myGrid charging pad with the contacts facing down. The blue indicator light will light up to show you that your devices are receiving power.

If a fault is detected, the indicator light will (1) not appear upon initial power up or (2) turn off during operation.

When not in use, the myGrid charging pad will be in Sleep Mode. In this mode, the charging surface and the indicator light both turn off.