Scotch® Super Glue Liquid in Precision Applicator features patented droplet control technology for the ultimate in precision dispensing. The clog resistant "stay fresh" bottle avoids dry-out, so you can use the bottle over and over again. Use on wood, metal, ceramic, leather, rubber, vinyl, plastic* and more.
*Not suitable for polystyrene foam, foam rubber, polyethylene and polypropylene.
Net Wt: .14oz (4g)
Made in Taiwan
Combustible. Bonds skin and eyes instantly. Causes eye and skin irritation. May cause allergic skin reaction. May cause nose and throat irritation. Skin contact through clothing may cause burns. Keep out of reach of children. Keep away from heat and flame. Avoid eye and skin contact. Do not get on skin or clothing. Avoid breathing of vapors. Use only with adequate ventilation. Do not swallow. Wash thoroughly after handling. Avoid excessive use of force to free bonded area. Close container after each use. Suggested first aid: Eye contact: Do not force eyelids open. Immediately flush with large amounts of water for at least 15 minutes. Get immediate medical attention. Skin contact: Wash affected area with soap and water. If signs/symptoms develop, get medical attention. For skin bonds: Quickly soak in warm water and avoid use of excessive force to free bonded area. If unable to free bonded area, or if lips or mouth are bonded, get medical attention. If spilled on clothing, immediately flush with large quantities of water. Do not remove bonded clothing; contact a physician. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If swallowed: Do not induce vomiting. Get medical attention. For additional health and safety information, call 1-800-3M-HELPS.
Comments about Scotch Super Glue Liquid in Precision Applicator, AD124, 1 ea:
Great Buy! i normally use Superglue, so i was hesitant to try this, but it works great! No complaints! Cleaner, in fact, than Superglue in the tubes, the cap is great, your glue won't dry to it and render it completely useless. The precision tip is just that, and no messy squirty bubbles. Glued my broken handle back on my mug, and so far hasn't broken off again. Although I should stop using it altogether, if it does break, i'll regret that i was too cheap too just toss it...
Bottom Line Yes, I would recommend this to a friend
Clean surface and thoroughly dry. Point tip away from face and body. Do not squeeze dispenser buttons while puncturing. To puncture turn nozzle and cap assembly down clockwise until fully seated and tight. Remove cap by turning counterclockwise. Apply adhesive lightly to one surface only. Firmly press parts together. Hold until set. Wipe off excess immediately with a paper towel. Wipe applicator tip with cloth or tissue after use. Replace cap. Screw on tightly. Store with tip up in a cool, dry place.
More For Your Money! Bonds Instantly! Precision Applicator Self Piercing
Tube Works Best on Clean Non Porous Surface Metal Rubber Plastic Single Use Super Glue includes just the right amount ...