Easy to Use Super Glue in a Precision Applicator! (Cyanoacrylate)
Fingers stay clean!
You control the flow
Self piercing cap
Gel works well on porous surfaces & vertical applications
A revolutionary precision applicator that allows you to apply adhesive where you want it, how you want it. The easy to hold AccuTool® allows for either single drop control or continuous stream. No mess. The Original Super Glue®: Fast. Easy. Effective.
For:
wood
leather
porcelain
metal
plastic
rubber
Push one side for one drop or both sides for a continuous stream.
Applicator contains 5g of Super Glue (non-refillable)
Find the Right Glue. Fast.™ Call 1-866-GLUE911
Made in Japan
Warnings
Eye irritant. Bonds skin & eyes in seconds.
Contains ethyl cyanoacrylate. Avoid contact with clothing as can cause burn. For accidental eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover and gently peel adhesive off with fingernail; water exposure will wear off residual adhesive within a few days ( do not use polish remover around eye area).
Keep out of reach of children.
Cyanoacrylate: Danger. Bonds skin and eyes in seconds. Irritating to eyes, respiratory system and skin.
Point AccuTool® Away from face and body. Do not squeeze AccuTool® buttons while puncturing. To puncture, screw nozzle and cap assembly onto AccuTool® completely. To u8se, remove outer cap. For continuous stream; hold both buttons simultaneously for heavy bead or apply less pressure for thinner bead. For one drop at a time; press the small button for each drop. Apply glue to one surface and hold pieces together for 15 seconds. After use, wipe tip before replacing cap to prevent sticking. AccuTool® should be stored with tip up in a cool, dry place.
For proper use: 1. Protect clothing & work surfaces (metal foil works well) and use in well-ventilated area. 2. Apply glue to one surface only. For optimum bonding, surfaces should be clean & dry. 3. Do not spread glue with fingers. Use applicator nozzle tip. 4. For best results, items should mate well. 5. Not recommended for: a. bonding parts which are subject to great shock or immersion in water. b. polythylene or polypropylene. c. glass.
