This ergonomically designed pump fits conveniently in the palm of your hand for ease of use and control. The on/off switch is conveniently located and can be operated with a flick of your thumb. The multiple valve adaptors provide the opportunity to inflate/deflate travel beds and other consumer grade inflatables. Designed with an extra long cord which allows for more space when inflating larger items.
Made in China
Carefully follow instructions on articles to be inflated. Never exceed recommended pressures. Bursting items can cause serious injury
Never leave pump unattended while in use
Do not use under wet conditions, please keep away from water
Never allow sand, small stones, etc, to be sucked into inflation or deflation port while operating
Never look into or point the inflate opening toward your eyes while pump is operating
Do not attempt to put hand or fingers into the inflation or deflation ports
The supply cord cannot be replaced. If the cord is damaged, the appliance should be scrapped
CAUTION-To reduce the risk of electric shock, do not expose to rain. Store indoors.Don't use the pump consistently for over 20 minutes, take 10 minutes break before you use it again. HOUSEHOLD USE ONLY!.
Power source must be 120VAC, 60Hz. Do not operate the pump continuously over 20 minutes, that will make the pump overheat and cause pump damage. Do not try to repair the pump by changing the inner components. To avoid child personal injury, like fingers stretching into the inlet and touching the blades, it's necessary to keep the pump away from children. Keep the pump and its power supply cord in a dry, shady and cool place. To inflate items:
Connect power supply cord to 120V AC power source
Hold pump against inflation port on item to be inflated and turn the switch firmly "on" by pushing forward and "off" by pushing backward
Note: On larger items like inflatable boats and large air mattresses, the pump will fit directly into the inflation valves and provide faster inflation times. Use the appropriate nozzle adapter on small inflation valves as on small air mattresses, etc. To deflate items:
Open the external stopper on valve of item to be deflated
Attach nozzle adapter to deflation port of the pump, hold pump against deflation port on item to be deflated
Turn the switch firmly "on" by pushing forward and "off" by pushing backward
Note: On small inflation valves, the valve may have to be "pinched" with your fingers to open the flapper inside the valve and allow the air to escape..